GeekVape Ammit 25 Flavor RTA

Ammit 25 RTA från anrika Geekvape. Ammit är en single-coil RTA som utvecklats för alla flavor-chasers. Ammit ser tämligen enkel ut men erbjuder till trots en hel del möjligheter under huven .GeekVape Ammit 25 RTA  är byggd för att kunna gå upp till 70 W. Vätskekapaciteten är 2 ml med det förmonterade glaset, men har möjlighet att höjas med extender glas som finns med bland reservdelarna som inkluderas i kittet.

GeekVape DIY

Mer detaljer

i lager

Produkten finns för tillfället inte i lager

349,00 kr


GeekVape Ammit 25 Flavor RTA

GeekVape Ammit 25 RTA är en större  och förbättrad version av den tidigare Ammit-tanken. I denna tank rymmer det en coil (single coil) och den är byggd för att kunna gå upp till 70 W. Smak & ångmässigt presterar den riktigt bra med rätt coil. Vätskekapaciteten är 2 ml med det förmonterade glaset, men går upp till 5 ml med det medföljande reservglaset. Luftflödet är justerbart och fungerar på så sätt att luften kommer ifrån tre olika håll, för ökad ångproduktion. Önskar du använda en 810-drip tip (medföljer ej), så får du även med en 810-top cap.

Tekniska detaljer för GeekVape Ammit 25 RTA Tank

  • Höjd: 38 mm (utan drip tip inräknat)
  • Diameter: 25 mm
  • Vätskekapacitet:
    • 2 ml med förmonterat glas
    • 5 ml med medföljande reservglas + adapter.
  • Munstycke:
    • 510-drip tip i Delrin medföljer.
    • 810-drip tip är kompatibelt via medföljande 810-topcap. Munstycket medföljer ej.
  • Påfyllning: Via smidig topfill
  • Justerbart luftflöde: Ja, via botten
  • Typ: Direct Lung (DL)

Detta medföljer i paketet

1 st Ammit 25 RTA Tank
1 st 5 ml Reservglas
1 st 5 ml Adapter
1 st Drip tip
1 st 810-kompatibel topcap (810-drip tip ingår ej)
1 st Reservdelspåse

GeekVape Ammit 25 RTAGeekVape Ammit 25 RTAGeekVape Ammit 25 RTA

The Ammit 25 RTA is Geekvape’s new take on an old favorite, the Ammit RTA. The diameter has been expanded to 25 mm, tapering down to 24 mm at the base. The kit comes with a number of extensions: an extra glass tank to increase capacity to 5 mL, chimney extender, and a 810 / Goon-style drip tip adapter. The biggest overall difference to the original Ammit RTA is the build deck though. Completely redesigned, the deck features 3-way airflow for single-coil builds. The deck posts (2 mm high by 2.5 mm wide) are placed opposite one another, leaving almost 8 mm in the center free for larger coil types. One post traps the coil in place, while the other is open, and flathead grub screws fasten the build into place. It’s fair to say that the Ammit 25 RTA is designed with exotic coil builds in mind, and has the space to fit them.

The Ammit 25 RTA comes partially preassembled with the 2 mL tank. Build quality is excellent. All threading feels well engineered, with good tolerances throughout. Geekvape’s Ammit logo and name are engraved deeply on the chimney that surround the build deck. The Geekvape name is engraved twice on each top cap and works well as a grip to unscrew the tank. The Ammit 25 has two airflow openings at the base: the airflow control ring features some chunky recessed knurling and has five settings that click into place. The knurled ring immediately above rotates the tank and chimney independently of the build deck and allows you to finetune the openings of the juice inlets.

Although it comes without a Goon-style drip tip, the extra top cap will fit them or any other 810 drip tip. And while that will increase the diameter of the mouthpiece, the tank’s internal chimney has a fixed diameter of 6 mm.

The build deck

The build deck was something new for me. For best results, build your own coils, or using pre-made ones, straighten out one lead so that the ends of the coil are facing away from each other. Build posts are situated on the outer edges of the deck, leaving a large, almost 8 mm wide space in the middle. The post holes are new, too: the positive post has a closed-off slot which you can slide one end of the coil into, while the negative has an open slot, meaning the other end of your coil can be easily fed in. It makes sense to start building from the positive post, so you have a little wiggle room (pun).

Post holes are 2.5 mm with 3 mm long grub screws to match, so a lot of exotic coil types are well catered for. Airflow is provided through the large vent directly underneath the coil, as well as from the two sets of three small holes next to the post holes. The juice wells are roughly 5 mm deep and 6 mm wide at the edge. I find it helps to taper the edges of your cotton down to a diamond shape before feeding them into the holes.

GeekVape Ammit 25 RTA

Mått och vikt
Höjd38 mm (thread and drip tip excluded) 48 mm with drip tip
Diameter25 mm (Drip Tip diameter: 15mm)
Behållarkapacitet2.0 ml
TillverkareGeek Vape
Rebuildable coilJa
Paketet innehåller1 x GeekVape Ammit 25 RTA, 1 x 5ml Glass Tube, 1 x Expansion Adapter, 1 x Extra 810 Top Cap, 1 x Allen Key, 1 x Spare Parts Polybag, 1 x User Manual
Design och material
Drip Tip15 mm diameter